Check valve

apidrop Fig. 302 is a rubber-faced, flanged swing type check valve that allows water flow in one direction only. A hinged clapper remains open with water flowing in one direction and automatically closes when flow stops preventing backflow. Removable cover allows easy access for inspection and maintenance. These valves are suitable for installation in both horizontal and vertical (with the flow upwards) pipelines. Rapidrop Fig. 302 flanged swing check valve is only available with ANSI 125/150 flanges. Applications Potable water, sewage disposal, water distribution service & feed lines, irrigation and fire protection pipe systems Connections ANSI 125/150 Flange to ASME B16.1

Butterfly Valves

Lever/Gear operated grooved butterfly Valve with factory installed tamper switch. Grooved/Wafer end. PN16/20/25

Gate Valves

Outside Screw and Yoke (OS&Y) gate valve with resilient wedge, The stem is pre-grooved for installation of a supervisory switch. The interior & exterior have an electrostatically applied fusion - bonded epoxy coating of 0.2 - 0.5 mm as per AWWA C-550. Rapidrop 103FF OS&Y gate valve is used in a fire protection sprinkler system, the stem and stem nut are located outside of the body of the valve which makes it easy to see if the valve is open or closed. If the full length of the stem is visible then the valve is open, if the stem is not visible then the valve is closed. Rapidrop OSY2 supervisory switch is available to monitor the open or closed status of the 103FF OS&Y gate valve. UL listed & FM approved

2 Way Inlet Breeching Valve

Wall Indicator Valve